Conservar Regalrez 1094 Varnish Kit

$19.80
In stock
Only 2 left
SKU
540-31201

Conservar Regalrez 1094 Varnish Kit has everything needed to prepare a colorless, reversible varnish made from Regalrez 1094 resin dissolved in pure, aromatic solvent and UV stabilizer.

Save up to $8.00 on Varnish kits!
=
Save $8.21
$66.89

Conservar Regalrez 1094 Varnish Kit allows you to make varnish fresh to use when needed. The kit contains the following items:

• Mineral Spirits (solvent)
• Regalrez 1094 (varnish resin)
• UV Stabilizer
• Mixing jar
• Pipette

Conservar Finishing Varnish (made by Natural Pigments) is a colorless, reversible varnish made from hydrogenated hydrocarbon (Regalrez 1094) resin dissolved in pure, low-aromatic solvent and UV light stabilizer. Conservar Finishing Varnish is made according to the original formula developed by E. René de la Rie formerly of the National Gallery, Washington, D.C. Varnishes based on this formula will not crosslink or yellow over 100 years as shown by tests conducted at the National Gallery, Washington, D.C.* Conservar achieves optimum wetting of the paint surface to enhance and bring out colors, has minimum solvent action on paint, and maximum resin content for best coverage. It dries to a film that levels well and can be rubbed when dry just like mastic or dammar varnishes.

* Rene de la Rie and Christopher McGlinchey. 1990. New synthetic resins for picture varnishes. In Cleaning, Retouching and Coatings: Technology and Practice for Easel Paintings and Polychrome Sculpture—Preprints of the Contributions to the Brussels Congress, September 3–7, 1990 (J.S. Mills and P. Smith, eds.) pp. 168–73. International Institute for Conservation of Historic and Artistic Works.

Recommended Uses

Conservar Regalrez Varnish is recommended as a final varnish on the following paint films:

  • Alkyd
  • Oil

Varnishes do not work well with casein, distemper, egg tempera, gouache, watercolor and drawings because the varnish will be absorbed by the paint and/or paper, becoming an integral part of the picture that could cause discoloration. In addition, varnishes on works created using casein, distemper, egg tempera, gouache, watercolor and drawing cannot be removed.

To varnish casein, distemper, egg tempera, gouache, watercolor and drawings, apply an isolating coating on the painting or drawing first, then apply a final picture varnish, such as Conservar Finishing Varnish. In this way, the final varnish can be removed without damaging the painting or drawing underneath. Remember, however, any isolating coating becomes a permanent part of the art work since it is absorbed by the paint layer.

Coverage

Makes approximately four fluid ounces (118 ml) which covers approximately 80 square feet (7.4 square meters).

Directions

Prior to actual use, it is very important to test Conservar varnishes on test pieces to understand how they perform and how they alter the surface appearance of your paintings. For best results, apply to a test piece that is similar in composition as the artwork to be varnished. This will help ensure that a successful varnish application will be achieved.

How to Prepare

Remove all items from package. Pour mineral spirits into jar with varnish resin. Close jar tightly, shake and allow to stand until completely dissolved (usually one to two days). Once dissolved and no remaining resin particles are visible in the jar, fill pipette with solvent from jar and release into small amber vial containing the UV stabilizer. Close the vial and shake until completely mixed. Pour solvent and stabilizer mixture into jar. If the vial is not completely empty, draw any remaining liquid into pipette and release into jar. Stir the contents of the jar well and the varnish is ready to use. Best used within 30 days of combining ingredients.

When to Varnish

The best practice is to wait 6 to 12 months before varnishing with Conservar Regalrez Varnish. Oil and alkyd paint films need time (typically months) to polymerize and form a resilient film otherwise a coating added on top of an improperly cured film may cause the layers beneath to swell and loosen.

It may be possible to apply Conservar Regalrez Varnish when the thickest areas of your painting are dry through—not touch dry. To determine if your painting is “dry-through”, press into the thickest area of your painting with your thumb at the same time twisting it a full 90° on the paint film. If your painting is on a flexible support, such as stretched canvas, be certain to provide support to the opposite side. The paint is considered dry-through when there is no loosening, detachment, wrinkling, or other of distortion visible on the paint surface. This procedure is fully described in the ASTM Standard D1640: Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature.

Please note, however, that the more the oil paint is allowed to polymerize or cure the more likely the varnish application will be successful. Always test the application of varnish on test pieces first to determine the suitability of the varnish for your application.

Preparation for Varnishing

Acclimate your painting and varnish materials and tools to the same environment. At least several hours prior to varnishing, place all items, such as your painting, brushes, containers, and Conservar varnish, in the same room. Varnish in a dust-free environment with the least amount of air movement to avoid raising dust.

It is best to brush or spray apply Conservar varnishes. Other methods, such as applying with paint pads, sponging or rolling, are not recommended, as they may result in foaming, loss of film clarity, non-uniform coverage, excessive film build, sagging, or deposit of materials from the application tool.

Brush Application

Apply with a wide flat, soft-hair brush. Conservar Regalrez Varnish can be thinned up to 20% with odorless mineral spirits. DO NOT MIX WITH WATER. Apply only one coat as a final varnish when applying by brush. Allow to dry three days and wipe varnished surface with a soft, lint-free cloth.

Spray Application

The best way to achieve an even coating of varnish is to apply by spraying. This is particularly true for impasto surfaces. Spraying is also a useful technique for creating a matte surface. The size of the surface to be sprayed will determine the best type of spray equipment to use. Conservar varnishes can be sprayed from an airbrush, airless or air-pressure spray equipment, or refillable aerosol spray can.

To prepare for spraying, make sure all equipment is free of dirt. Work in an area free of dust and dirt and keep work off the ground when spraying. Spray two to four light even coats instead of one or two thicker applications, allowing enough time for drying between coats (1 to 4 hours or until the surface is tack free).

Release the spray trigger when stopping the motion of the sprayer during application in order to avoid a buildup of varnish in one spot. Maintain a uniform distance from the surface, and avoid spraying in an arcing motion. Make straight passes across the work, changing direction once the spray has cleared the edge of the piece being varnished. Slightly overlap the spray pattern with each pass, until the entire passage has been covered.

To achieve a more uniform spray application, turn the painting 90 degrees and apply the subsequent coat perpendicular to the previous one. A typical spray application lays down a film only 1/8 to 1/4 the thickness of a brush coat application. If maximum protection is required of the varnish layer, apply multiple coats.

Drying Time

When applying multiple coats (spray application only), allow 1 to 4 hours in between coats. Inspect the surface for tackiness, which may mean that the coat is not sufficiently dry. Let the varnish cure several days before packing or transporting the painting. During transportation and storage, avoid contacting the surface with packing materials, including glassine, bubble wrap or any other plastic. NEVER STACK PAINTINGS, whether varnished or not.

Care and Storage

As Conservar varnishes are removable, it is important that they not be painted over. Paint applied over the varnish would also be potentially removable, and would pose a difficult problem in conservation or restoration attempts.

Techniques for Reducing Gloss

There are a number of different ways to reduce the gloss of Conservar varnish:

  1. Dilute the varnish with additional solvent before using.
  2. Apply a thin coating. The thinner the coating, the lower the gloss.
  3. Brush the varnish as it dries. When the varnish is starting to set up, if you continue to brush it then you will microscopically roughen the surface and it will be less glossy.
  4. Spray apply the varnish.

If the varnished surface of your painting appears too glossy, you can apply a final coating of Conservar Wax. Rub on a thin layer of wax with a soft, lint-free cloth using small circular strokes. Allow the wax to dry overnight for the highest degree of matte. To create a satin finish, allow the wax to dry for about 4 to 6 hours, and then gently buff.

Cleanup

Clean all equipment immediately following application. Clean brushes with odorless mineral spirits, such as Rublesol. To ensure desired results, always make a test piece for your particular application and surface.

Removal

Use a clean, soft, lint-free rag dampened with odorless mineral spirits. Gently rub the varnished surface and repeat process until all varnish is removed. Do not use stronger solvents. Allow to dry and reapply Conservar varnish.

 

Regalrez is a registered trademark of Eastman. Conservar is a trademark of Natural Pigments. Rublev Colours is a registered trademark of Natural Pigments.

More Information
SKU540-31201
BrandRublev Colours
VendorNatural Pigments
Processing TimeUsually ships the next business day.
Resin TypeRegalrez

Hazard Pictograms

FlammableHealth HazardExclamation Mark
GHS09: FlammableGHS08: Health HazardGHS07: Exclamation Mark

Signal Word: Danger

Hazardous Components

Distillates (petroleum), hydrotreated light

Hazard Statements

Flammable liquid and vapor.

Causes skin irritation.

Causes serious eye irritation.

May cause genetic defects.

May cause cancer.

May cause respiratory irritation.

May be fatal if swallowed and enters airways.

Precautionary Statements

If medical advice is needed, have product container or label at hand.

Keep out of reach of children.

Read label before use.

Keep away from heat/sparks/open flames/hot surfaces. No smoking.

IF SWALLOWED: Do NOT induce vomiting. Immediately call a POISON CENTER or a physician.

IF ON SKIN (or hair): Immediately take off all contaminated clothing. Rinse skin with water.

IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or a physician if you feel unwell.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Conforms to ASTM D4236.

Here are items you recently viewed during your visit of Natural Pigments Recently Viewed
No recently views items
Clear All
Conservar Regalrez 1094 Varnish Kit
Copyright © 2024-present Natural Pigments, Inc. All rights reserved.