Ceracolors Molding Paste can be added to Ceracolors to paint thickly and to build impastos of wax. Molding Paste contains talc and while its appearance is gray, it can be tinted with any Ceracolors paint. Add Ceracolors Molding Paste to Ceracolors paint for thick, impasto-like applications of paint.
Pastes differ from gels in that they are opaque and may contain calcite (chalk), clay, talc, bentonite (diatomaceous earth), fibers, or other fillers resulting in a white to gray finish with a variety of textures and properties. Pastes can also be used to create textured foundations for painting.
Ceracolors Mediums offer artists unlimited control of Ceracolors water-soluble wax colors. Use mediums to control transparency, viscosity and consistency. Ceracolors Mediums can be thought of as colorless wax paints, as they are composed of the same or similar waxes as are Ceracolors paints. They are the “glue” or binder that dry to form continuous, durable films.
This section lists some typical uses of Paste Medium, but it is not intended to be exhaustive. New and different ways to successfully use these products are always being discovered.
Extend Paint: Adding Paste Medium to Ceracolors can extend paint. Extending Ceracolors with Paste Medium allows the paint to go further, while maintaining a much higher quality than “student grade” paints. Paste Medium can be added to Ceracolors in any amount desired.
Alter Consistency: Mixing Paste Medium into Ceracolors, will thicken the paint, and provide additional body. All Ceracolors mediums are compatible with the entire family of Ceracolors products.
Provides hard, opaque and matte finish. Useful for creating tough, durable finishes for smooth or textured surfaces. Can be carved with hand or any hot tools when dry.
Add to Ceracolors Paste Medium directly to paint on the palette or in a container. Paste Medium can be added in any amount desired.
There are no acute or known chronic health hazards associated with the anticipated use of this product (most chemicals are not fully tested for chronic toxicity). Always protect yourself against potentially unknown chronic hazards of this and other chemical products by keeping them out of your body. Do this by avoiding ingestion, excessive skin contact, and inhalation of spraying mists, sanding dusts and vapors from heating. Conforms to ASTM D-4236
|Processing Time||Usually ships within 24 hours.|