Slaked Lime 5kg
This is Type S hydrated lime, as defined by ASTM C 206 and ASTM C 207, which was coined because the hydrated lime was considered to be "Special." Its special qualities include high early plasticity, high water-retentivity, limited oxide content and minimal coarse fraction. These properties enhance the performance of both mortar and plaster.
This lime is ideal for making lime putty, milk paint and limed rosin or liming other resins. It can also be used to neutralize free fatty acids and remove water in unrefined drying oils, such as cold-pressed raw linseed oil, after washing with water to remove impurities. Use with caution because it is very alkaline and has high pH in water, which can irritate the skin and eyes.
|Chemical Name:||Calcium Hydroxide|
|325 Mesh (%):||98%|
|Color:||Soft white powder|
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect the container against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible.
Dust causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath. Can cause chemical bronchitis. Ingestion may be followed by severe pain, vomiting, diarrhea, and collapse. Corrosive. Skin and eye contact may produce severe irritation and pain. Refer to Material Safety Data Sheet.
This product is not known to be toxic to fish and aquatic organisms. If product is spilled, comply with Federal, State and local regulations on reporting spills. Refer to Material Safety Sheet and labels for further details.
|Processing Time||Usually ships the next business day.|
|Size||5 kg bag|