Painting Panels (Primed and Unprimed)

Show Filters
Hide Filters
View as Grid List

11 Items

Set Descending Direction
  1. Copper Artist Panel (Natural)

    Starting at $15.00

    Quickview
    - +
  2. Copper Stain Remover

    As low as $12.10
    Quickview
    - +
  3. Copper Rinse

    As low as $14.30
    Quickview
    - +
per page

Painting on Aluminum Composite Material (ACM) Panels

Why ACM Panels are excellent painting supportsWhy ACM Panels are excellent painting supports
Why ACM Panels are excellent painting supports

ACM panels are made of aluminum and plastic and are commonly used for outdoor signs and displays, but they can also be used as a support for fine art paintings. However, due to the smooth surface of ACM panels, the paint may not adhere well and can result in a less durable final painting. Therefore, it is essential to properly prepare the surface of the ACM panel before painting by cleaning, sanding, and then priming to improve the adhesion of the paint.

Artefex ACM panels are the perfect choice for artists and professionals looking for a durable and versatile painting support. Made from high-quality aluminum composite material, these panels are lightweight, weather-resistant, and designed to withstand the rigors of both indoor and outdoor use. The smooth, hard surface of the panels allows for easy application of paint, and the panels are perfect for a wide range of techniques, from oil and acrylic painting to mixed media and collage. With Artefex ACM panels, you can create stunning paintings that stand the test of time, whether working in a studio or on location.

Artefex ACM Panels are available with a wide variety of surfaces specifically designed for different mediums and painting techniques.

To prepare an unprimed ACM panel for painting, please read How to Prepare Aluminum Composite Material (ACM) for Painting for the best practices to achieve excellent results.

Frequently Asked Questions

What is an ACM panel, and how is it different from other painting supports?

An Aluminum Composite Material (ACM) panel is a type of flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. They are commonly used in construction for cladding buildings, signages, and other architectural applications.

ACM panels are different from other painting supports in a few ways:

  1. Surface: ACM panels have a smooth, hard surface that can be challenging to paint on due to the low porosity and lack of tooth. The surface is typically covered with a polyester coating unsuitable for painting directly on with artists' paints.
  2. Texture: Due to their smooth surface, it may not be easy to achieve a textured surface on ACM panels.
  3. Flexibility: ACM panels are rigid, so they are less prone to cause mechanical stress on paint films.
  4. Durability: ACM panels are weather-resistant, and are not affected by humidity and temperature changes, making them suitable for outdoor painting.
  5. Compatibility: ACM panels are compatible with various types of paint, but they must be primed to ensure good adhesion of the paint layers to the coated aluminum surface.
  6. Adhesion: The coated aluminum surface may have low adhesion to some types of artists' paint, so priming is recommended.

Artists who work with ACM panels need to consider these properties when planning and executing their paintings. They may need to use specific techniques or materials to overcome the challenges of painting on this support.

How does the surface of ACM panels affect the outcome of my painting?

The smooth, hard surface of ACM panels can affect the outcome of a painting in a few ways:

  1. Adhesion: Due to the low porosity of the surface, most artists' paint may not adhere well to ACM panels, which is why the surface of the ACM panel should be primed with a suitable primer.
  2. Brush marks: The smooth unprimed surface of ACM panels can make it difficult to apply paint with a brush. However, this is overcome by applying a ground.
  3. Textures: Due to the smooth surface, achieving a textured surface on ACM panels may be difficult. However, using painting mediums, such as paste mediums, can help to create texture.

Artists who work with ACM panels need to consider these properties when planning and executing their paintings. They may need to use specific techniques or materials to overcome the challenges of painting on this support.

Are there any specific techniques that work well on ACM panels?

There are several techniques that can work well on aluminum composite material (ACM) panels, but the specific techniques that work best will depend on the artist's desired outcome and style. Here are a few techniques that may work well on ACM panels:

  1. Spray Painting: Spray painting is a technique that is well suited for ACM panels due to the smooth surface of the panels, as it allows for a consistent and even application of paint.
  2. Airbrushing: Airbrushing is a technique that can achieve a smooth and consistent finish on ACM panels. This technique is well suited for detailed and realistic paintings.
  3. Stenciling: Stenciling is a technique that can be used to create patterns or designs on ACM panels. This technique can be used to create a consistent and repetitive pattern on the surface of the panel.
  4. Collage and mixed media: This technique can create a textured surface on ACM panels. This technique can be used to add depth and interest to the painting.
  5. Drybrush: This is a technique that can be used to create a textured surface on ACM panels.
  6. Digital printing: This technique can be used to print a design or a photograph on the ACM panel; it can be used as a starting point for a painting.
‎How does the paint react when applied to ACM panels?

The way that paint reacts when applied to aluminum composite material (ACM) panels can vary depending on the type of paint and the surface preparation of the panel. Here are a few ways that paint can react when applied to ACM panels:

  1. Adhesion: The paint may not adhere well to the surface due to the smooth, hard surface of ACM panels. However, if the surface is properly prepared with primer, the adhesion of the paint is improved.
  2. Brush marks: The smooth surface of ACM panels can make it difficult to apply paint with a brush without leaving visible brush marks. However, if the surface is properly prepared with primer, brushing is improved.
  3. Drying time: The smooth surface of ACM panels can affect the drying time of the paint, usually prolonging drying time because of the nonabsorbent surface. However, if the surface is properly prepared with an absorbent primer, drying time will be similar to p[ain't on other supports with the same ground.
Can I use mixed media on ACM panels?

Yes, it is possible to use mixed media on aluminum composite material (ACM) panels. Mixed media refers to the practice of combining different types of art materials, such as paint, collage, and found objects, to create a unique piece of art.

ACM panels can be a suitable surface for mixed media art because they are durable, lightweight, and weather-resistant, which makes them suitable for outdoor art installations. Additionally, due to the smooth surface of ACM panels, it is possible to use a variety of techniques, including collage, decoupage, and layering, to create a textured surface.

When using mixed media on ACM panels, it's important to consider the compatibility of the different materials with the ACM surface and to use a primer to improve the adhesion of the materials. Additionally, the surface should be clean and smooth to avoid any imperfections in the final painting.

How does the surface of ACM panels affect the drying time of my paint?

The smooth, hard surface of ACM panels has low porosity, which means that the paint may not be able to penetrate the surface and dry as quickly as it would on a porous surface. This can be overcome by applying a primer to the surface.

Can I use oil paints on ACM panels?

Oil paints can be used on aluminum composite material (ACM) panels, but it can be challenging due to the smooth and non-porous surface of the panels. Oil paints are not naturally compatible with the surface and may not adhere well or cure properly. However, with the right preparation, it is possible to achieve good results when using oil paints on ACM panels.

It is important to properly prepare the surface of the ACM panel before painting with oil paint. The surface should be cleaned, sanded, and then coated with an alkyd-based primer to improve the adhesion of the paint.

How does the surface of ACM panels affect the durability of my painting?

The smooth, hard surface of aluminum composite material (ACM) panels can affect the durability of a painting in a few ways:

  1. Adhesion: Due to the low porosity of the surface, the paint may not adhere well to ACM panels, which can result in a less durable final painting. If the surface is not properly prepared with primer, the adhesion of the paint can be poor, leading to flaking or peeling over time.
  2. Weather resistance: ACM panels are weather resistant and can withstand different types of weather conditions, but the painting on them can be affected by humidity, temperature, and weather conditions. For outdoor murals, using paint suitable for outdoor use and applying a protective varnish can help to improve the durability of the painting.
  3. Scratching: ACM panels are durable but can be scratched if not handled properly.
  4. Impact resistance: ACM panels are durable and can withstand some impact, but if a hard object strikes the painting, it can cause damage to the painting.

It's worth noting that the durability of a painting on ACM panels will also depend on the type of paint used, the artist's technique, and the environmental conditions to which the painting is exposed. Additionally, taking care of the painting and protecting it from damage can help to improve its durability.

How to prepare an aluminum composite materials (ACM) panel for oil painting?

Preparing an aluminum composite material (ACM) panel for oil painting can be a bit more involved than preparing other types of supports for oil painting. Still, with the right steps, you can achieve good results. Here are some general steps for preparing an ACM panel for oil painting:

  1. Clean the surface: The first step is to clean the surface of the ACM panel to remove any dust, dirt, or other debris. Use isopropyl or ethyl alcohol and a clean, soft cloth to wipe down the surface.
  2. Sand the surface: Once the surface is clean, use fine-grit sandpaper to lightly sand the surface of the ACM panel. This will help to remove the gloss of the coated surface and improve the adhesion of the paint.
  3. Clean the surface again: After sanding, clean the surface of the ACM panel again to remove any dust or debris.
  4. Apply a coat of oil or alkyd-based primer: Apply a coat of oil-based primer to the surface of the ACM panel. This will help to improve the adhesion of the oil paint.
  5. Allow the primer to dry: Allow the primer to dry completely before painting.

Some artists may use different methods to achieve excellent results, such as applying an acrylic ground to the surface instead of an alkyd primer.

Here are items you recently viewed during your visit of Natural Pigments Recently Viewed
No recently views items
Clear All
Copyright © 2024-present Natural Pigments, Inc. All rights reserved.