You have no items to compare.
Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings and varnishes. Its significantly extends the life of varnishes and coatings by minimizing defects such as yellowing, cracking and loss of gloss.
Tinuvin 292 is a tertiary amine developed for the UV stabilization of coatings and inks, making it an excellent general purpose hindered amine light stabilizer (HALS). Because of its liquid nature, it has the advantage of outstanding compatibility with a wide variety of coating systems, including waterborne and UV curable coatings.
Tinuvin 292 is used in the amount of approx. 2–3% by weight of the resin. For best results, It should only be added at the time of use to small batches of varnish that can be used within a few days. Tinuvin 292 is for use within an environment absent of ultraviolet light.
|Appearance||light yellow liquid|
|Density @ 20 °C (ISO 2811, DIN 53217)||g/cm3||0.9905|
|Solubility at 20°C (g/100 g solution)||Amount (grams)|
The dispersion of Tinuvin 292 in water may be accomplished by diluting with a water miscible solvent such as butylcarbitol.
Possible interactions with Tinuvin 292 with other paint ingredients, such as acid catalysts, should be carefully evaluated. The active substance is a mixture of Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate and 1-(Methyl)-8-(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate.
Tinuvin 292 may be used after adequate testing for applications such as:
• automotive coatings
• industrial topcoats
• coil coatings
• wood stains or do-it-yourself paints
• radiation curable coatings
Its high efficiency has been demonstrated in coatings based on a variety of binders such as:
• one- and two-component polyurethanes
• thermoplastic acrylics (physical drying)
• thermosetting acrylics, alkyds and polyesters
• alkyd (air drying)
• waterborne acrylics
• phenolics, vinylics
• radiation curable acrylics
The weatherability of coatings can be significantly improved by the use of a combination of Tinuvin 292 and the UV absorber, such as Tinuvin® 1130, Tinuvin® 384, Tinuvin® 928 or Tinuvin® 400. These synergistic combinations give in automotive coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. The light stabilizers may be added in two coat automotive finishes to the clear coat and base coat. However, according to our experience the optimum protection is achieved by adding the light stabilizers to the topcoat.
Recommended concentrations of Tinuvin 292 (Hindered amine light stabilizer concentrations are based on binder solids):
Clear coatings and coatings with metallic pigments
0.5–1.0% Tinuvin 292
Solid and tint pigmented coatings
1.0–2.0% Tinuvin 292
|GHS07: Exclamation Mark||GHS09: Environment Mark|
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/ clothing/ eye/ face protection.
P303 If on skin:
P311 Call a poison center or physician.
P333 If skin irritation or rash occurs:
P352 Wash with soap and water.
P362 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/ container according to regional, national and international regulations.