Platina Dewaxed Shellac Flakes

As low as $17.10
In stock
Only %1 left
SKU
510-32SFP
Perfect quick-drying finish. Produced from selected raw materials by the solvent extraction system, activated carbon is used.

Dewaxed Decolorized Shellac 

Produced from carefully selected raw materials by the solvent extraction system using activated carbon. With the solvent process wax and impurities are removed by dissolving the seedlac in a solvent, usually, chilled industrial alcohol. The solution is then filtered through fine cloth and the alcohol is recovered by boiling the solution. The dissolved shellac is then stretched to the required thickness on a roller. The product obtained is called dewaxed shellac. Highly sophisticated grades of dewaxed and decolorized shellac are further processed using activated carbon as the decolorizing agent.

Uses

Shellac is an excellent quick-drying finish. The flake form allows fresh quality shellac to be prepared and avoids waste. Use shellac as a sealant on wood after cleaning and prior to painting or finishing, on gilding before painting or varnishing, on grounds to reduce its absorbency, and on paint to isolate layers.

Origin and History

The source of shellac from lac has been known since earliest recorded times. Atharva Veda, estimated to be several thousand years old, clearly states that both lac, as well as lac dye, served as medicine. It was used in China as medicine as well, long before it was used in art. The original cultivation of lac for resin was for the dye that gives the resin its characteristic color. The use of the lac dye can be traced back to 250 C.E. when it was mentioned by Claudius Aelianus, a Roman writer on natural history. The use of shellac as a protective coating appears as early as 1590 in a work by an English writer who was sent to India to observe the country and its people.

Source

Shellac is an animal product secreted by the Coccus lacca, a scale insect that feeds on certain trees in India and southern Asia. Soon after the scale insect is hatched, it leaves its birthplace and begins to wander about, looking for a likely place to settle down. It finds this place upon a stem or a leaf or on the outside of a fruit. It inserts its sharp little beak in the plant tissue and then settles down for a lifetime of nourishment at this spot.

After feeding, the insect produces a gummy substance through its pores. It is soon covered by its secretion that in certain species looks like wax, in others like cotton, in still others like powder. The growing insect sheds one skin after another; these skins form a rounded scale, held in place by the secreted substance, which hardens into a protective covering called lac.

This lac is collected and then it is crushed, washed and dried. After further treatment, it is skillfully drawn into thin sheets of finished shellac. The level of refinement, the timing of harvest, and source of the lac, determine the color and specifications that make the various grades of shellac.

How to Prepare

Dry shellac is mixed with alcohol in a particular ratio called a “cut”, which refers to the amount of shellac in pounds dissolved in a gallon of alcohol. A 2-lb. a cut of shellac is 2 lb. of shellac resin dissolved in a gallon of alcohol. A 5-lb. a cut would be 5 lb. of resin dissolved in a gallon, etc. When mixing shellac from flakes or buttons, you can scale down the ratio of cut to make a suitable amount. For example, adding 2 oz. of flakes to 8 oz. of alcohol produces a half-pint of 2-lb.-cut shellac.

For most applications in painting and gilding, such as coating metal leaf or sealing wood panels, we recommend a 2-lb. cut of shellac.

Formulas
Ingredient "Small" 2 lb. Cut 2 lb. Cut 3 lb. Cut 5 lb. Cut
Shellac 2 oz. 2 pounds 3 pounds 5 pounds
Methyl alcohol 8 fl oz. 1 gallon 1 gallon 1 gallon

Denatured alcohol can be substituted for methyl alcohol, but shellac dissolves better in methyl alcohol. Denatured alcohol is ethanol, which is the same alcohol used in alcoholic beverages. However, denatured alcohol is adulterated with additives to render it unfit for human consumption. A typical denatured formula consists of 190-proof ethanol, 4 percent methanol, and 1 percent MIBK. The proof refers to the amount of pure ethanol as a percentage divided by 2 (e.g.: 200 proof equals 100 percent ethanol, 190 proof equals 95 percent ethanol). Some insist on using 200-proof ethanol, which dissolves the flakes a bit faster. However, using this as opposed to denatured alcohol hasn’t proven to increase the durability or other properties.

Combine the ingredients in a dark plastic or glass container with a tightly fitting lid. Soak the shellac flakes in about half of the total alcohol to be used for 24 hours or longer (cool room temperatures slow the process). Stir every 30 minutes or so and when dissolved add the balance of the alcohol.

After the shellac is fully dissolved, it may be desireable to strain through a fine weave cloth to remove any impurities. Shellac is made from the lac bug and a few bits of bug carcass are often left particularly in Seed Lac. Store in a cool and dark place.

Before the liquid shellac is used, it should be shaken or stirred thoroughly and allowed to stand for a few hours. Thinned with ten times its volume of alcohol, this solution serves well as a fixative.

Diluting Premixed Shellac

To dilute a premixed shellac solution, add the appropriate amount of alcohol, as shown in the chart below to the starting premixed solution. For example, to dilute a 2-lb. cut to a 1-lb. cut, add 2/3 of 1 part alcohol to a 1 part existing 2-lb.-cut shellac solution.

Dilution Ratio: x Parts Alcohol : x Parts Starting Cut
Starting Cut 1/4 lb. Cut 1/2 lb. Cut 1 lb. Cut 2 lb. Cut 3 lb. Cut
1/2 lb. Cut 1:1
1 lb. Cut 3:1 0.875:1
2 lb. Cut 5:1 2:1 0.67:1
3 lb. Cut 8.75:1 3.75:1 1.5:1 0.33:1
4 lb. Cut 11:1 5:1 2:1 0.75:1 0.25:1
5 lb. Cut 12.75:1 5.75:1 2.75:1 1:1 0.875:1

How to Apply

When applying as an undercoat prior to other paint or finishes use dewaxed shellac. Dip a natural bristle brush about half way into the shellac and gently remove excess shellac against the side of the container; this gives a reasonably filled brush for full strokes without incorporating air in the shellac. Apply the shellac in long strokes. Shellac should be sanded between coats. Allow each coat to dry thoroughly.

If the shellac is dry, sanding will produce a fine powder on the surface. If the shellac is not dry it will be somewhat tacky to sand and the paper will clog. After sanding, wipe the surface thoroughly with a tack cloth and recoat. Depending upon temperature and humidity conditions, allow from two to four hours drying for each coat.

Test all mixed shellac for drying if several months old. If the surface stays tacky after 8 hours and does not sand freely without gumming, the shellac is old and will not dry and must be discarded.

Toxicity

Shellac is not considered to be toxic, but care should be used in handling the ground product to avoid inhaling the dust.



Dewaxed Blonde Shellac Flakes

Information
Chemical Name: dihydroxyficocerylic acid (essential ingredient)
Chemical Formula: CH2CH2CH2(CHOH)(CH2)7CHOH-COOH
Properties
Density: 1.110–1.196
Hardness: 2.0–2.5
Refractive Index: n=1.520
More Information
SKU510-32SFP
BrandRublev Colours
VendorNatural Pigments
Processing TimeUsually ships the next business day.
Here are items you recently viewed during your visit of Natural Pigments Recently Viewed
No recently views items
Clear All
Platina Dewaxed Shellac Flakes
Copyright © 2012-present Natural Pigments, Inc. All rights reserved.