Oleogel is a thixotropic painting medium made with linseed oil and pyrogenic silica. Oleogel is a clear pale amber gel that adds transparency and thixotropic body to oil, resin-oil or alkyd paint. Add directly to your paint to give it transparency without thinning its consistency. Add pigments or extenders to thicken it for creating impasto effects that do not sink in.
Oleogel does not contain driers, so it is safe to use in oil painting without worry of cracking. When mixed with colors, Oleogel does not slow the drying time.
Oleogel adds transparency to whites without losing the body of the paint
Oleogel in the center, Flake White on the left and a mixture of Oleogel and Flake White on the right. The Flake White is stiff, plastic and short, but when mixed with Oleogel the mixture is semi-transparent, soft, yet sculptural.
Oleogel increases transparency without flowout and leveling
Rublev Colours French Raw Sienna at left and a mixture of Oleogel and Raw Sienna on the right. Below each is a brush out of the above examples. Rublev Colours French Raw Sienna is long, yet holds strokes well. When Oleogel is added to Raw Sienna it increases transparency without causing the flowout and leveling of brushstrokes.
Mix directly into your paint right on the palette.
To make your own paint with Oleogel, add directly to pigment powder until a stiff paste is obtained (almost the consistency of putty). Grind the paste with a muller on a flat surface before storing in collapsible tube. Some of its thixotropic property will be temporarily lost when grinding Oleogel with a muller, but should be restored when allowed to stand.
Health and Safety
There are no acute or known chronic health hazards associated with the anticipated use of this product (most chemicals are not fully tested for chronic toxicity). Always protect yourself against potentially unknown chronic hazards of this and other chemical products by keeping them out of your body. Do this by avoiding ingestion, excessive skin contact, and inhalation of spraying mists, sanding dusts and vapors from heating. Conforms to ASTM D-4236.